Dissolved Oxygen Controller




 Download Instruction Manual here



 Image  Model  Dimension  Range  Description
  DO313,
DO315,
DO317		  150x150x80 mm.  0-20 mg/L  The EnviLab Dissolved Oxygen Controller is a simple, accurate for Dissolved Oxygen control.  It is simplicity:  Simply plug the unit into a wall outlet, place the submersible aerator and air blower assembly in the aeration tank and reading data for aerate lagoon, solenoid valves or alarms and turnoff /Turn on the machine.  

The high and low set points are adjustable by screw and turning button until the desired set point appears on the LED digital readout.
         


Specifications of Dissolved Oxygen Controller.
 Model  DO 313  DO 315  DO 317
 Measurement Range  0-20 mg/L  0-20 mg/L  0-20 mg/L
 Accuracy  ± 5 % ± 5 %  ± 5 %
 Display  Digital LCD  Digital LCD  Digital LCD
 Analog Output  -  0-5 V  0-5 V, 4-20 mA
 Temperature  0-50 °C  0-50 °C 0-50 °C
 Calibration  2 points (Zero, Span) 2 points (Zero, Span)
 2 points (Zero, Span)
 Set Point choose from 1-20 mg/L
  choose from 1-20 mg/L choose from 1-20 mg/L
 Relay Output  5 VDC, LED indicator 5 VDC, LED indicator  5 VDC, LED indicator
 Communication  RS-232  RS-232  RS-232
 Power Supply  220 VAC  220 VAC  220 VAC
 Dimensions  150 x 150 x 80 mm  150 x 150 x 80 mm  150 x 150 x 80 mm
 Standard Accessories 2 bottles of electrolyte solution
1 pack membrane
3 O-ring
Cable of RS-232 5.0 m.
Cable of Relay1.0 m.
1 instruction manual
EnviLab Software		 2 bottles of electrolyte solution
1 pack membrane
3 O-ring
Cable of RS-232 5.0 m.
Cable of Relay1.0 m.
1 instruction manual
EnviLab Software		 2 bottles of electrolyte solution
1 pack membrane
3 O-ring
Cable of RS-232 5.0 m.
Cable of Relay 1.0 m.
1 instruction manual
EnviLab Software
< Prev   Next >